Real-time detector of GSM terminals

The authors propose a feasible real-time GSM terminal detector, to be located in a restricted area. All idle terminals entering it are forced to emit signaling information, which can be captured. As far as the authors know, market alternatives are nonexistent. A possible application is presented: a mobile terminal detector for airport access bridges     

Acid-catalyzed etherification of bio-glycerol and isobutylene over sulfonic mesostructured silicas

Sulfonic-acid-functionalized mesostructured silicas have demonstrated an excellent catalytic behavior in the etherification of glycerol with isobutylene to yield tert-butylated derivates. Di-tert-butylglycerols (DTBG) and tri-tert-butylglycerol (TTBG) have shown to be valuable fuel additives leading to decreases in the emission of particulate matter, hydrocarbons, carbon monoxide and unregulated aldehydes. Likewise, said ethers can also act as cold flow improvers for use in biodiesel, reducing also its viscosity. The activities and selectivities achieved over sulfonic acid-functionalized mesostructured silicas are comparable or even superior to those displayed by widely used macroporous commercial acid resins. Under optimized reaction conditions, these mesostructured catalysts yield a complete glycerol conversion with a combined selectivity towards DTBG and TTBG up to ca. 90%. Furthermore, no formation of undesirable isobutylene oligomers is observed. The acid strength of the sulfonic acid sites has also been found to be an important factor affecting the catalytic performance of these materials.     

A kinetic interpretation of a negative time constant in impedance equivalent circuits for the dissolution/passive transition

A theoretical impedance function is proposed for the active/passive transition of nickel in an acid sulphate medium. It is considered that passivating species progressively covers the electrode surface. This approximated model predicts the appearance of negative time constants in the impedance spectra when coverage coefficient θ values for passive species are greater than 0.5.     

Coalescence of Levitated He II Drops

We describe experiments to study the coalescence of He II drops levitated in a magnetic trap. Using a high speed CCD camera, we have produced movies of drops coalescing at temperatures as low as 0.7 K. We examine some interesting features of the motion during and following coalescence.     

Coherence- and correspondence-driven work domains: implications for systems design

A distinction is made between coherence- and correspondence-driven work domains. This novel domain taxonomy is used to argue that the widely accepted goal of making the interface representation compatible with the user's mental model is not always appropriate. For correspondence-driven domains, it is more meaningful to constrain design from the side of the work domain rather than from that of the user. The implications of the coherence/correspondence distinction for the modelling of work domains, for interface design in computer supported co-operative work, and for the development of a multidimensional taxonomy of work domains are also briefly pointed out. The discussion suggests that the correspondence/coherence taxonomy provides a powerful conceptual tool for addressing fundamental issues in human-computer interaction.     

Selective oxidehydrogenation of ethane with CO2 over CeO2-based catalysts

Ceria catalysts were found active and selective to the oxidehydrogenation of ethane (ODE) with CO₂ and the actual contribution for C₂H₄ formation from heterogeneous catalysis was 75–55% in the range 953–993 K. The presence of calcium ions in solid solution in the ceria crystalline network increased significatively the selectivity to ethene and the efficiency of CO₂ as oxidant in the heterogeneous reaction.     

Correlation between microhardness and optical anisotropies and crystallinity in lamellar regenerated cellulose

An experimental study about the effect of the crystallinity on the birefringence and microhardness of regenerated cellulose tubular films is reported. The degrees of crystallinity of samples varied between 0.53 and 0.66. It was demonstrated that for the polymeric films studied there was an excellent agreement between crystallinity and optical and microhardness anisotropies, showing that micro-indentation hardness, scarcely used but rapid and nondestructive, is a suitable technique for characterizing the degree of order in this polymer.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Use of recycled copper slag for blended cements

Copper slag is a by‐product generated during smelting to extract copper metal from the ore. The copper slag obtained may exhibit pozzolanic activity and may therefore be used in the manufacture of addition‐containing cements. In this paper the effect of the incorporation of the copper slag in cement is measured. Blends of copper slag with Portland cement generally possess properties equivalent to Portland cement containing fly ash, but very different to the silica fume incorporation. Copper slag and fly ash reduce the heat of hydration more effectively than silica fume in mortars. The replacement of 30% cement by copper slag reduces the flexural and compressive strength in a similar way to fly ash; however, after 28 days, the reduction is less than the percentage of substitution. Hydrated calcium aluminate phases were analysed using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The pozzolanic activity of copper slag is similar to that of fly ash and higher than silica fume. In the presence of low water/cement ratios, certain pozzolanic materials produce a very compact cement paste that limits the space available for hydration products, a determining factor in the formation of hydrated calcium aluminates. SEM was found to be a useful analytical technique when aluminates are formed and can be clearly detected by XRD. Copyright © 2008 Society of Chemical Industry